In this article
Why there is no honest one-number answer
Homeowners ask us this every week, and the honest answer is: it depends on your house - and any company that quotes a full installation over the phone, sight unseen, is guessing with your money. Two homes on the same street can legitimately differ by thousands of dollars because of what is above their ceilings.
What we can do is show you exactly what the price is made of. There are five factors, and once you understand them, you can read any quote - ours or a competitor's - and see whether it is honest. Our AC installation page covers the process itself; this article covers the price.
Factor 1: system size and type
AC systems are sized in tons, and the right size comes from a load calculation - square footage, ceiling height, insulation, windows, and sun exposure - not from matching whatever is there now. A bigger system costs more in equipment, but the real trap is the opposite mistake: an oversized unit that cools fast, shuts off, and leaves the house humid (see our guide to short cycling). A correct load calculation is free with a proper quote, and skipping it is how homeowners end up paying twice.
System type matters too: a straightforward like-for-like swap of the same style of system is the least expensive path, while changing system types, relocating equipment, or adding a second zone adds labor and materials.
Factor 2: efficiency - SEER2 ratings
SEER2 is the current efficiency rating - higher numbers mean lower monthly bills. Entry-level systems meet the Florida minimum; high-efficiency systems, especially variable-speed inverter models, cost more upfront and noticeably less to run, and they dehumidify better because they run longer at low speed - a real comfort difference in South Florida humidity.
Whether the higher tier pays for itself depends on how much you run the AC, and in South Florida the answer is usually yes over the system's life, because our cooling season is ten months long. A good quote shows you both options with the math, not just the one the salesperson prefers.
Factor 3: the condition of your ductwork
This is the factor phone quotes always miss. A new AC connected to leaking, crushed, or undersized ducts will not cool like a new AC - you will have paid for efficiency and delivered a fraction of it. Older South Florida homes often have ductwork that is original to the house: joints dried out, insulation fallen, runs crushed by attic storage.
Sometimes the ducts need only sealing and minor repair. Sometimes sections need replacement, and occasionally a full air duct replacement is the honest recommendation. Any installer who quotes without looking in your attic has not actually quoted your job.
Factor 4: permits, code, and the unglamorous parts
A legal installation in South Florida includes a permit and inspection, and meeting current code can require real work: a new or resized electrical disconnect, a condenser pad rated for wind load, hurricane straps, a float switch on the drain, and proper refrigerant line sizing. Disposal of the old system and refrigerant recovery are part of the job too.
These line items are where suspiciously cheap quotes cut corners - and an unpermitted install can surface later as a failed home sale inspection or an insurance problem. Ask every bidder one question: is the permit included, and who pulls it?
Factor 5: the extras that are actually worth it
- A UV light at the coil - keeps mold and buildup off the wettest surface in the new system from day one; inexpensive to add during an install, pricier later.
- A modern thermostat - a smart or programmable thermostat makes a variable-speed system noticeably better at humidity control.
- Surge protection - Florida lightning is hard on new electronics; a surge protector is cheap insurance for a modern control board.
- Extended labor warranty - worth pricing, especially on high-efficiency systems with more electronics.
None of these should be pressure-sold. They should be listed, priced separately, and your choice.
How to compare quotes honestly
Get the quote in writing, after an in-home visit, and compare the same five factors: the load calculation, the exact model and SEER2 rating, what ductwork work is included, whether the permit is pulled, and what warranty covers parts and labor. A quote that is vague on any of the five is not cheaper - it is unfinished.
If your current system is limping along, our article on how long an AC lasts in Florida helps you judge repair-versus-replace. And when you are ready, call us at (954) 687-9356 - the inspection is free, and the price we give you is exact, in writing, and final.
Frequently asked questions
Why do AC installation quotes vary so much?
Because the jobs are not the same job. System size, SEER2 efficiency tier, ductwork condition, permit and code work, and extras all differ from house to house. A quote given without an in-home inspection is missing at least the ductwork and code factors - which is exactly where the surprises, and the change orders, come from.
Does a higher SEER2 system pay for itself in Florida?
Usually, yes. South Florida runs air conditioning around ten months a year, so efficiency savings compound far faster here than in most of the country. Variable-speed systems also dehumidify better, which is a comfort upgrade you feel every day. The payback is longest in small, shaded, lightly used homes - your quote should show the math for your house.
Can I keep my old ductwork with a new AC?
Sometimes - if the ducts are correctly sized, sealed, and in good condition. But connecting a new high-efficiency system to leaking or crushed ducts wastes much of what you paid for. A proper quote includes a duct inspection, and any needed duct work should be listed separately so you can see exactly what you are paying for.
Are permits required for a new AC in South Florida?
Yes. A replacement AC requires a permit and inspection in South Florida municipalities, and the installer should pull it. An unpermitted install can cause problems with insurance claims and when you sell the home. If a quote is much cheaper than the others, ask whether the permit is included - that is often the difference.
How long does a new AC installation take?
A straightforward like-for-like replacement is usually completed in one day. Installs that include ductwork repairs, electrical changes, or a system relocation can take two days or more. The home is without cooling during the swap itself, so a good installer schedules the work to minimize that window and confirms the system is cooling before they leave.
